Filters

List of foot plate Tenders

List of latest foot plate Tenders in Indian Tenders. Click on any foot plate Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for foot plate Tenders.

All-Tenders (34)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35424600 | 30 Sep, 2025

Tender Value : 0

Leh - Ladakh

Tender for gem bids for ttieg, high pressure washer 3hp for washing for washing ofvehicle, foot mat set for tata safari, screw driver set, fire extinguisher 1 kg mg, pilot plate 12 cm x 45cm, guideplate 12cm x 45cm, veh cover one each for maruti gypsymahindra scorpio and tata safari

Central Government/Public Sector

TRN :35424782 | 10 Oct, 2025

Tender Value : 0

Begusarai - Bihar

Tender for supply of spare parts of spring loaded foot switch for pvef, psa, pvig consisting of three items. 1 spring for foot switch 01 no. 2 rocker with shorting plate for foot switch 01 no. 3 fixed contact block for foot switch 01 no. clw specn. no.- clw/es/3/0032 alt-g.

Central Government/Public Sector

TRN :35425075 | 11 Oct, 2025

Tender Value : 0

West Siang - Arunachal Pradesh

Tender for gem bids for renovation, excavation of footing column, providing and laying cement, reinforced concrete work, formwork, steel work, maincolumn square, ms pipe for gate arc, anchor bolt dia20mm, ms base plate for column, prime 2 coat on item, enamel paint, earthwork excavation soil, pcc belowfooting, rcc footing, 12 mm dia rod weight, 10 mm diatmt bar weight, brick masonry 1st class bricks, cementplaster on both sides, coping top capping course, painting2 coats, earthwork in excavation, providing and laying, providing and laying bedding, paver block count estimate, compacting the laid surface, 30 watt led light, copperwire, switch 6 amp isi marked, socket 6 amp isi marked, mcb of 16 amp isi marked, mcb box, skilled, unskilled /bid number: gem/2025/b/6609520* /dated: 20-09-2025 & & / bid document1 / 29

Central Government And Public Sector

TRN :35408041 | 26 Sep, 2025

Tender Value : 0

Bongaigaon - Assam

Tender for supply of foot plate arrangement for demu coach.

Central Government/Public Sector

TRN :35411098 | 16 Oct, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for iwts, iis computerprocessoramd 5000 series ryzen 9 5950xdesktop processor 16 core and 32 thread processor with340 to 490 ghz clock speed ramram 32 gb furybeast rgb ddr4 speed upto 3733 mts ssdm2 2280512gb pcie nvme ssd mzv7p512bw hard diskdrivehdd2tb7200 rpm sata graphics cardnvidiageforce rtx 2080ti gtx 3070 with minimum 4 ports 3xdisplay and and 1x hdmi mother boardmsi asus mpgb550 gaming plus amd am4 m3 x usb 20 2 x 32 gen2xhdmi atx motherboard compatible with processor smpsasus rog strix 850 watt gold psu 24 pininputvoltage range 220v acfrequency 50hzplus or minus5percentage current 4adc computer chasis master boxk501l rgb e compatible to the motherboard computercooling fancooler master master liquid ml240zr rgb orhigher compatible with mother board and processor mousewith mouse padlogitech dell usb mouse optical withmouse pad keyboardlogitech dell keyboard usbkeyboard 104 keyscomfortable quiettypingspillresistant designdurable keyssturdyadjustable tilt l 185led monitor display screen size4699cm185brightnessas per specification routertplink ac 1900 speaker set bluetooth towerspeaker set 20 channel output model spa9120b 80w rms40 hz20 khz frequency bluetooth adapterusbbluetooth adapter for speaker 4 port usb hub4 port usbhub usb 30 with 2 ft extended cable ups 5 kva lineinteractiveoutput power capacity 3500 watts 5000 vamax configurable power 3500 watts 5000 va as pertechnical specification 52 x external dvd rw drivesupport usb specification revision 20 40 times fastertransfer rate than that of usb 11 as per technicalspecification laser printer print speed black normal bid number gem2025b6651391 dated 16-09-2025 0 0 bid document1 128 a4 up to 14 ppmprint speed footnote speed specificationper industry standard testing methods dvdrecordabledvd 47 gb with jewel case dvdrecordable dvd 85 gbwith jewel case projectorprojectors npp554u 5500lumens or highernative wuxga1920x1200 with aspectratio suport 169 lcd projector web cam webcamc270hd with adjustable mounting stand usb cablehighquality usb extender cable 20 15 mtr dyeton ir filterirfilter for 830nm laser with mouning clamps for fitting infront of web cam c270hd auto calibration setautocalibration set complete with 30x ir leds with02x12vacdc infra red detection card new port modelfirc1s infrared sensor card sensitivity area 4x3 cms display port to hdmi convertordisplay port to hdmiconvertor hdmi cable 15 mtr length hdmi cable extraguard multi conductor with both end mf mouldedconnectors operating system win 10 pro 64 bit oslatest version microsoft officemicrosoft office 2010 64 bitwith msaccess and license laser diodeir laser 830nmwith specification operating volt35v dc wavelength asper technical specification weapon boardweapon boarddetails of weapon boardas per technical specification recoil boardwireless recoil board as per technicalspecification weapon modification kitwpn harnesswpnharness incl wiring sleeve and connector hallsensorshall sensor magnetsmagnets for hall sensor hallsensorsdual hall sensor aluminium rod 50 mm diaft50mm dia delrin rod black 2 dia ft2 dia black pneumatic itemsstainless steel pipe1 dia stainless steelpipe length 17 both side threaded brass reducer brassreducer 1 x 12 pressure regulatorair pressure regulator30 bar with guage elbowstainless steel elbow 1 internaldia with threaded stainless steel pipe stainless steelpipe1 10 ft both sided threaded hose pipehose pipeflexible ph 253 12 length 15 mtr with flowing capacity160 bar stainless steel pipe1 dia stainless steel pipelength 5 feet both side threaded elbow12 internal diastainless steel elbow 12 dummy socket1 dia dummysocket ss internal thread u type clampms angle t standwith u type clamp with nut bolt steel both sidethreaded12 mm length 55 flow control valveflow control valvess 12 nipplestainless steel nipple 12 both sidethreaded nut and boltnut and bolt 11mmlength35with washer shavo regulatorshavo airregulator 30 kg load presure with guage compressorindustrial air compressor 30 bar model elgits 15 lb pet with 25 mtr 4 core 15 amp current ratingpower cable pu pipepu pipe janatics pneumatics 12mm30 bar wh00b06 b22 b06s1 lg 30 mtr t joint6mm tjoint model wp2300606pu 6 black t elbow joint6mmellbow joint model wp2200606pu 6 black l type brassadapterpu 6 brass adapter 12 external thread and 6mminternal thread brass adapterpu 6 brass adapter 14 external thread and 6mm internal thread solenoidvalvesolenoid valve 30 bar 12v dc with relay mercury brass adapterbrass adapter 12 with nut pu12 brassadapterpu 12 brass reducer 12 into 18 couplerstainless steel flange coupler 1 internal dia sscouplernut and bolts for flange coupler 1 internal dialength 2 x 19mm nut with washer thread sealentthreadsealent jointing paste loctite243 400 ml teflontapeteflon tape for sealent roll thread bundle threadbundle for pipe threads 1 bundle tag and tie tag and tieuniversal type pack cap and casing6mm dia cap and bid details2 128 0 0 2 2 casing, wooden screw 3mm wooden screw length 1 4 , wooden screw 2mm wooden screw length 1 2 , woodenblock wooden block universal type, soft wood soft woodpieces 18x14x20mm for giving gap between firing table and50mm casing nos 1500 all black color powder coated , paint white enamel type 1 ltr, lubricant compressorlubricant oil elgi part no 000998052 3 ltr, lubricant airlube elgi part no 000998044 1 ltr, pneumaticcylinder pneumatic cylinde ss 25mm bore x 70mm stroke od 30mm port size 1 8 as ped drg no a3 515 smp56443, pneumatic items pneumatic cylinder forrl pneumatic cylinder ss 80mm bore x 100mm stroke port size 3 8 as per technical specification, pneumaticcylinder for mgl pneumatic cylinder ss for mgl as per drgno a3 515 smp 56873, ss pipe ss pipe industrial 1 2 diax length 4 one side thread, flange gasket coupler flangegasket rubber 3mm thickness type large, legris bluepipe legris blue pipe nylon semi rugged 6mm outer dia x 4mm internal dia 10 bar pressure, reducer brass reducer 1 x 3 4 dia, silencer silencer wire mesh 1 2 dia externalthread, ss union ss union 1 internal dia with thread, sspipe stainless stell pipe 2 feet and one side thread, welding rod welding rod stainless steel 308 l size 3 15 x3 50 mm batch no m77804, 10 core cable unshielded m type yy 6 3mm dia strength 8 1 kg, 3 core powercable 15 a m h07 rnf 1 5 sq mm dia, 3 core powercable 5a m h07 rnf 1 5 sqmm dia, 3 pin plugs 5aanchor isi standard, 5a socket anchor, computer powercord 230 v ac 5 a 3 mtr length nos with 3 pinpluge h07 rnf 1 5mm dia best quality, power extensionboard spike buster 15 5 amp multipin 6 socket with 15mtr cable, power extension board spike buster 6 socket with 5 mtr cable, teflon wire multi strand black m 1mmmultistrand, teflon wire multi strand red m 1mmmultistrand, teflon wire multi strand white m 1mmmultistrand, teflon wire multi strand yellow m 1mmmultistrand, teflon wire multi strand green m 1mmmultistrand, teflon wire multi strand brown m 1mmmultistrand, teflon wire multi strand violet m 1mmmultistrand, teflon wire multi strand blue m 1mmmultistrand, teflon wire multi strand purple m 1mmmultistrand, teflon wire multi strand orange m 1mmmultistrand, adhesive 20ml tube loctite hvht, solder soft 100 gm roll solder soft with core of non corrosive flux forstd electronic work and wax 50 gm, adhesive loctiteaa324 and adhesive loctite 7075 adhesive loctite aa324and adhesive loctite 7075, industrial grade adhesivefevikwik fevikwik 5ml tube, heat shrink sleeve heatshrink sleeve 6mm black model e203950, heat shrinksleeve i heat shrink sleeve 3mm blackmodel e203950 ii heat shrink sleeve 2mm blackmodel e203950, insulation tape roll wonder tape 10 mtrroll pvc, transparent tape 2 transparent tape 2 , instrument cooling fan ac 230v, universal adapter for 3pin plug for 6 amps, firing platform modular firingplatform for kneeling standing and lying position modularfriring platform for kneeling standing and lying position, firing mat with padding 6x3 with padding, firing pillows 12 x big and 12 x small 1x2x2 feet and 1x2x4 feet, instructor station instructor keyboard rack ms withblack powder coating with 2xinstrument cooling fans andlock and keys power cable, instructor station rack, instructor station monitor rack, instructor station coolingfan, instructor station mcb assembly, instructor station //bid details3 / 128 power cable, instructor station wheel, instructor stationvoltmeter, instructor chair isi standard, manufacturer slable plate 515 army base wksp manufacturer plate as persample, fabrication items for projection system as pertechnical specification, mounting stand videoprojector projector mounting stand with 10 mm thick metaltop plate size 500mm length x 400 mm width height400mm, ruggedized enclosure for projector l into b into h24 into 22 into 8 5 with 5 into 5 air ventilation slidingcover, white velcro adhesive velcro 5m 2 inch , set offasteners fasteners a screw slotted cheese head m2x20is no 1366 nos 200 as per technical specification, cableties and tie bases 25mm packet of 100 as per technicalspecification, cable ties and tie bases 50mm packet of100 as per technical specification, spiral pipe 1 5 dia flexible conduct mtrls nylon pa6 thread pg36 temp 40 deg to 120 deg , general tools allen key 2 3 4 5 6 7 8 9 set of 8 isi standard, nose plier isistandard, screw driver set isi brand, spanner open jaw13 17 isi standard, spanner open jaw 24 27 isi standard, spanner open jaw 17 19 isi standard, taparia adjustable12 inch spanner open jaw isi standard, corrugated sheet m corrugated sheet m 2 mtr width, bubble sheet m bubble sheet 2 mtr width, cotton waste kg cottonwaste kg , hessian cloth m hessain cloth 2 mtr width, frp container 3 1 2 l x 2 w x 2 h feet with doubletoggle latches and handles, lock 5 lever with keys godrej50mm, ldpe strech wrap roll 1200 mtr 23 micro 5inch 12inch streched film roll, nails 1 kg nails 1 kg 1 isistandard, silica gel 5gm pack of 80 pcs, wooden crates forpacking chir wood packing crates for packing smldimension and as per technical specification, bindingwire size 2061 02 1 26 92 mtr roll, double sidedtape double sided foam tape 2 inch width 48mmx5 mtr, log book to be printed as per the requirement of smd, technical manual to be printed and spiral binded softcopy of technical manual will be provided by smd , userhand book to be printed and spiral binded soft copy of usermanual will be provided by smd iis computer processor amd 5000 series ryzen 9 5950xdesktop processor 16 core and 32 thread processor with3.40 to 4.90 ghz clock speed or higher version, ram ram32 gb fury beast rgb ddr-4 speed upto 3733 mt/s, ssd m.2 2280 512gb pcie nvme ssd mz-v7p512bw, harddisk drive hdd-2tb, 7200 rpm sata, graphics card nvidiageforce rtx 2080ti /gtx 3070 with minimum 4 ports 3xdisplay and and 1x hdmi, mother board msi / asus mpgb550 gaming plus amd am4 m.3 x usb 2.0, 2 x 3.2 gen2xhdmi atx motherboard compatible with processor orhigher, smps asus rog strix 850 watt gold psu 24pin, input voltage range 220v ac, frequency50hz 5%current 4a, d.c output voltage: +5v; current:40a, voltage: +12v; current: 20a, voltage: +3.3v;current:28a, voltage: -5v; current: 0.5a, voltage: -12v; current:0.5a, voltage: +5v sb; current: 2a 450w, computer chasis master box k501l rgb e compatible to the motherboard, computer cooling fan cooler master: master liquidml240zr rgb or higher compatible with mother board andprocessor, mouse with mouse pad logitech /dell usbmouse optical with mouse pad, keyboard logitech /dellkeyboard usb keyboard 104 keys, comfortable, quiettyping, spill-resistant design, durable keys, sturdy, adjustabletilt legs, plug-and-play lenght -45cms, width -15cms, 18.5led monitor display screen size 46.99cm 18.5brightness typical 250cd/m, contrast ratio typical dc50, 000:1 typ. 1, 000:1, resolution 1366 x 768, response //bid details4 / 128 time typical 5ms viewing anglehorizontal/vertical170 /160 cr>10, color supported 16.7m, signal inputvideo signal analog rgb sync. signal separate h/v, composite, sog, connector 15pin d-sub, power powerconsumption 20watts stand by power dpms<0.3watt, type built-in, features plug & play ddc 2b, usbpowered hub option no mac compatibility yes, multimediaspeakers no, wall-mount 75 x 75mm, tco no, cabinet colorhigh glossy black optional accessories - special featuresmagicbright3, magiceco, magicangle, off timer, image sizecolour effect, customised key, windows vista basicdimension product dimensionwith stand, wxhxd 455.6 x375.0 x 178.0mm, product dimensionwithout stand, wxhxd 455.6 x 309.4 x 63.1mm shipmentdimensionwxhxd 521 x 382 x 132mm, weight productweight 3.55kg, shipment weight 4.65kg, stand typesimple, function tilt, router tplink ac 1900, speaker set bluetooth tower speaker set 2.0 channel output modelspa9120b 80w rms 40 hz-20 khz frequency, bluetoothadapter usb bluetooth adapter for speaker, 4 port usbhub 4 port usb hub usb 3.0 with 2 ft extended cable, ups5 kva line interactive output power capacity 3500 watts /5000 va max configurable power 3500 watts / 5000 vanominal output voltage 230v output voltage noteconfigurable for 220 : 230 or 240 nominal output voltageefficiency at full load 92% output voltage distortion lessthan 3% output frequency sync to mains 50/60 hz +/- 3hz user adjustable +/- 0.1 crest factor 3 : 1 waveform typesine wave output connections 8 iec 320 c13 2 iec 320c19 6 iec jumpers bypass internal bypass automatic andmanual input nominal input voltage 230v input frequency50/60 hz +/- 5 hz auto sensing input connections hardwire 3-wire input voltage range for main operations 160 -280v input voltage adjustable range for mains operation100 - 280v other input voltages 220, 240 powerchutepersonal edition v2.0 for windows 2000 & xp multilanguage support with power card. with 3 pin indiansockets, 52 x external dvd r/w drive # support usbspecification revision 2.0, 40 times faster transfer rate thanthat of usb 1.1, lightweight, pocket size, elegant aluminumcabinet, hot swapping capability # support usb2.0 transferrates up to 480mbps, # usb 2.0/ide compliant:, intergratedusb tranceiver, high speed 480mbit and full speed 12mbitsupport usb suspend/resume, remote wake up support, #metal:aluminum & plastic with power cable and data cable, laser printer print speed black normal, a4 up to 14ppm, print speed footnote, speed specification per industrystandard testing methodsstandard memory, 2 mbembedded in sip package, 16k bit nvram; maximummemory, 2 mb embedded in sip package, 16 kbnvram, processor speed 266 mhz, print quality black best, up to 600 x 600 dpi 1200 dpi effective output; printtechnology, laser duty cycle monthly, a4, up to 5000pages, dvd recordable dvd 4.7 gb with jewel case, dvd recordable dvd 8.5 gb with jewel case, projector projectors np-p554u 5500 lumens orhigher, native wuxga1920x1200 with aspect ratio suport16:9, lcd projector, web cam webcam c270hd withadjustable mounting stand, usb cable high quality usbextender cable 2.0 15 mtr dyeton, ir filter ir filter for830nm laser with mouning clamps for fitting in front ofweb cam c270hd, auto calibration set auto calibration setcomplete with 30x ir leds with 02x12vac/dc adapter, 2amps, 24 wmax. 5mm led socket for ir led attachment //bid details5 / 128

State Government

TRN :35415491 | 13 Oct, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for supply of thermometer examination light height measurment scale wall mounted stethoscope weighing machine adult weighing machine pediatric led torch sphygmonometer otoscope tuning fork hammer tounge depressor examination table with iv stand foot step revolving stool led x-ray viewing box fetal doppler fetal monitor fetoscope infantometer stadiometer 100 m.a x-ray machine (mobile) ecg machine colour doppler ultrasound machine with 4 probes: abdomen, pediatric ultra-sonogram (obs & gyne) portable ultrasound emg machine echo machine lead partition ot table ot light laryngosocpes with blades crash cart trolley medicine trolley surgical scrub anesthesia workstation suction machine (electrical) autorefractor keratometry digital lensometer non contact tonometer slitlamp digital phoraptor operating microscope operating microscope basic pheco machine yag laser iol master crossmatch workstatation centrifuge tube sealer blood collection monitor doner coach blood bank refrigerator plasma freezer -80 degree plasma extractor vdrl shakar blood bank centrifuge 12 bucket composcale hand stripper platelet agitator with incubator portable donar chair calorimeter elisa reader and washer semi auto analyzer electrolyte analyzer reagent refrigrator fully automatic biochemistry analyser high end tube lebling analyzer advance 5 part cell counter with autoloader cell counter esr analyzer binocular microscope coagulation analyzer hba1c analyzer fully automatic biosafety cabinate microtom tissue processor embeding system slide stainers cytocentrifuge grossing station rtpcr analyzer nucleic acid extraction system gel documentation system laminar flow hood deep freezer -20 deep freezer -80 chemiluminescence immunology analyzer clia incubators water bath for serology hot air oven rotor/shaker time stop watch alarm clock hb meter ph meter dental chair with accessoriess dental xray machine with rvg bp apparatus defibrillator video bronchoscope audiometer tympanometer berra machine ent head light oae screeing machine moterized labor table infant weighing scale neonate pulse oxymeter table top vacuum extractor beds with foam mattress bed side locker delux spo2 monitor nebulizer ultrasonic iv stand over bed table motorized icu beds syringe infusion pump multipara monitor with stands strecher on trolley pediatric icu beds pulse oximeter with pediatric probe pediatric ventilator abg machine portable led standing lights foot operated suction machine bilirubinometer bubble cpap high flow nasal machine open care radiant warmer phototherapy single surface led transport incubator oxygen hood pulse oximeter table top cardiac markar glucometer dressing drum small dressing drum medium dressing drum large instrument try small instrument try medium instrument try large no2 cylinder co2 cylinder anesthesia workstation high end with accessories c arm machines flat panel neumatic torniquet power bone drill machine cautery machines high end with accessories plasma sterilizer with accessories harmonic generator with accessories 4k laparoscope with hand instruments and accessories cautery pad with cautery machine with accessories debrither with microdrill with accessories smoke evacuator with accessories lscs set of 58 instruments laparatomy set of 83 instrument mtp set of 15 instrument trachestomy set of 20 instruments eye surgery set of 43 instruments abdominal tubectomy set of 63 instrument abdominal hysterectomy set vaginal hysterectomy set stsg set delivery kit set of 20 instruments vasectomy set of 2 instrument post martum kit chalazion set of 25 instruments ortho instrument set ent set 32 instruments automated system to treat liquid medical waste needle cum syringe destroyer three segment waste segreegation trolley sharp container three bucket system for cleaning waste transportation trolley autoclave 4 drum three seater chair cupboard medicine rack instrument cabinate bedside screens oxygen cylinder trolley video laryngoscope cough assisst machine blood warmer pft machine flow meter with spanner patient warmer mtp high suction machine emergency hydraulic trolley biomedical waste bucket lead apron digital x ray cassette 8x10 digital x ray cassette 10x12 digital x ray cassette 14x17 digital x ray cassette 11x14 x ray films 8x10 x ray films 10x12 x ray films 14x17 x ray films 11x14 ambu bag adult kit ambu bag pediatrict kit rapid test kit micro pipettes ambu bag neonatal

State Government

TRN :35396507 | 25 Sep, 2025

Tender Value : 34.27 Lacs

Raigad - Maharashtra

Tender for borewell drilling 150 mm dia by dth machine including transporting of machine at worksite, providing & placing 180 mm dia 6 kg p.v c.casing pipe (l5:4985-1988) & fixing borecap after complation of borewell, yield testing of borewell by 90 degree v notch method for minimum 2 hrs .continously, providing cap for 180 mm dia p.v.c.casing pipe, casing pipe lowering & grouting, solar system, supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintained for 5 years. 3 bhp solar pump construction of bandhara, clearing cutting thorny shurbes, bushes , mooleyhills etc. complete, excavation in hard murum/hard man kankar/pebbles, exceeding 1.5m in width including depositing the material as directed with all lead upto 15m and lift into 1.5m including boulders of size less than 0.10cum including dressing etc complete. excavation in soft rock exceeding 1.5m in width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10cum, dressing etc complete. excavation in hard rock exceeding 1.5m in width by blasting including depositing the excavated material as directed with all leads and lifts including boulders of size exceeding 0.10cum including dressing etc complete providing and laying rubble soling below foundation in layers including fillinf with rubble chips murum etc. complete (excluding royalty material) providing and laying in situ cement concrete of grade m-150 of trap / granite / gneiss /quartzite graded metal for pcc with or without surface reinforcement rcc/concreting requiring heavy or spetial type of shuttering for works of gallery ,sluice,spillway crest,spillway down stream face,energy dissipating structure,inteke structure,training walls,piers abutments etc.with concrete mixture considering lead of 50 m with shuttering and scaffolding ,placing ,compacting,curing etc.complete with an initial lead of 50 m and lift of 1.50 m. providing & laying in position tor steel reinforcement including cutting bending binding including cost of reinforcement binding wire etc complete with a lead of 50 m & lift of 1.50 m providing casing embankment using selected previous material available directly from excavation in layers including cost of all other operations such as collection of material spreading material in layer of specified thickness sorting out breaking clods levelling sectioning edges sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with lead up to 1km for watering and 6m lift. providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. providing and fixing 90 cm x 60 cm marble plate engraving 10 cm.height letter ,figures including painting the lefters/ figures withapproved colour and shade complete " "rcc well providing and laying in situ cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete." providing & costing in constructing in situ. c.c of trap granite/ quartzite / gneiss/ metal of approved quality of r.c.c. work as per detailed drawing & design or as directed by engg. in charge including dewatering , ceterind from work,compacting, finishing the formed surface with c.m. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( by weight batching & mix design for m-250 & m-300 only use of l&t, acc ambuja, birla gold, manikgad, rajashree etc. cement is permitted excluding m.s or tor reinforcement in r.c.c. m-250grade. 1) r.c.c. m-250for beam " 2) r.c.c. m-250 for vertical wall providing & fixing in position steel bar reinforcement of various diameters for r.c.c. pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, coping, fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). tor steel" providing & laying weep holes of 80 mm ac/pvc pipe as per drawing for abutment returns, return walls etc. complete. dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by engineer-in-charge (including cost of machinery labour fuel )etc complete. providing rubble stone paving 15cm thick in 1:3 cement mor tar over bedding of 15cm thick cement concrete of 1:4:8 propor t ion wi th t rap / grani te / quar tzi te / gneiss metal including st r iking joints and water ing etc. complete." providing internal cement plaster 20mm. thick in two coats in cement mor tar 1:3 wi thout neeru finish, to concrete, br ick sur face, in all posi t ions including scaffolding and cur ing etc. complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete." reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. providing and fixing in position c.i. dapuri steps or 22 mm dia. m.s. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by engineer- in-charge." providing and fixing 90 cm x 60 cm marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. lift 0.00 m to 1.50 m" "switch room excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a- 1/259)" excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-2/259) providing and laying in situ cement concrete in m – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. "providing second class burnt brick masonry with convent ional/ i.s.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. complete " providing and casiting in situ cc of trap /granite/quartzite/gneiss metal of approved quality for r cc work as per detailed drawing and designs or as diredcted by engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withcm 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. slabs b) in rcc m-200" providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. item no 8 :- filling the plinth & floors murum bedding in trenches with approved murum from excavatyed materials form foundation 15 cm. to 20 cm. layers including watering and compaction complete. providing and laying cement concrete flooring 40 mm thick wi th m15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. with natural sand providing and fixing frame wi th / wi thout ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete item no. 11 :- providing and fixing count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete item no. 12 :- providing and fixing count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete item no.13 :- providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. item no.14 :- providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. item no. 15 :- providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete item no. 16 :- providing and fixing in position steel bar reinforcement of various diamenters for rcc piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) "pumping machinery item no. 1 :- providing, erecting and giving test of submersible pump set conforming to is 8034 and motor conforming to is 9283, with water proof winding. pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415 v ± 10%, 3 ph, 50 hz a.c. supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge out let as per manufacturer's design. antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages" "item no. 2 :- supplying and erecting, flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed. 3 core 10sqmm" "item no. 3 :- supplying and erecting fully automatic star delta starter to operate squirrel cage induction motor working on 380- 440 volt, 3 phase, 50 hz with no volt coil, over load element, and on off push buttons, with necessary material and connected to supply, etc complete. starter with original sheet steel encloser. > 7.5 hp & up to 12.5 hp" item no.4 :- providing , installing & commissioning main control pannel board including v.meter & a. meter of suitable range single phase prevention 8 nos. of phase indicater lamps with colour glass of 230 v rotary switch over load capacitor suitable for 7.50hp and 12.50bhp pump etc.complete. (market rate) "item no.5 :- providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. pressure gauge shall be installed as directed, with tapping on rising main. pressure gauge (100 mm dia)" item no.6 :- providing tools for pumping. item no. 7 :- main wiring work from m. s. e. b. cut out to the panel board 4 core x 459 mm 1100 grade with i. s. i. mark standard / aluminum armored cable (94.1 p.36) item no. 8 :- providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea-ep "solar pump item no.1 :-supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintaince for 5 years " "rising main item no. 1:- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm item no.3 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no. 4 :- providing, erecting, connecting double flanged short body pattern tye manually operated butterfly valve having body, disc and end cover in graded cast iron to is 210 gr. cf 200 generally conforming in bs 5155, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding c.c. foundation/ structural steel support confirming to is 3095-1991. sluice valves 80 mm dia for washout" "item no. 5 :- providing and supplying air valves as per is-10845 and mjp’s standard specifications of approved mark and quality of following diameters including all taxes (central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete. air valves 15 mm dia" "item no.6 :- excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (earth soil)" "item no. 7 :- excavation for foundation/pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. (hard murrum)" "item no.8 :- excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond area and lifts as below, stacking as directed by engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. soft rock" "item no.9 :- excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. lift 0 to 1.5 m hard rock" item no. 10 :- filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. "item no. 11 :- lowering, laying and jointing h. d. p. e./ m. d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm "item no. 12 :- lowering laying and jointing in position following c.i.d/f reflux valves butterfly valves and sluice valves including cost of all labour joining material, including not bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of sluice valves) sluice valves 80 mm dia for washout" "item no. 13 :- lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. air valves 15 mm dia" "item no. 14 :- providing and fixing in position air valve shaft including providing and fixing gi medium class or 6 mm thick m.s. pipe shaft 2.70 m long over branch flange of air valve tee, providing pcc block of m-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in pcc m-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by engineer-in-charge for following diameters of pipe lines (type design attached.) upto 150 mm on murum & harder strata" item no 15 :- providing and laying in situ following grades of c.c. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. "item no. 15 :- providing and constructing b.b. masonry valve chamber with 15 cm thick 1:3:6 proportion pcc bedding, including excavation, b.b. masonry in c.m. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing c.i. manhole frame and cover in rcc 1:2:4 coping or cm thick slab etc. complete as directed by engineer-in-charge. size 0.90 x 0.60 x 1.20" item no. 16 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 17 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia hdpe pipe 8 kg/sqcm" "distribution system item no .1 :- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 2 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no.3 :- providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete sluice valves 50 mm dia" "item no 4 :- excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-1/259) earth soils" "item no. 5 :- excavation for foundation / pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bda-3/259) hmb" "item no. 6 :- excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking as directed by engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-4/259) soft rock" "item no. 7 :- excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (bd-a-6/259) hard rock" item no. 8 :- filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (bd-a-10/263) "item no. 9 :- lowering, laying and jointing h. d. p. e./m.d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 63 mm dia hdpe pipe 6 kg/sqcm" "item no. 10 :- lowering, laying and jointing in position following c.i.d/f reflex valves, butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of valves.) sluice valves 50 mm dia" "item no. 11 :- providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (by weigh batching and mix design for m250 and m-300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) a) 1:2:4 (m-150) grade " "item no. 12 :- providing and fixing c.i. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg) " item no. 13 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 14 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 15 :- providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x35 x3 mm frame with properly cross braced m.s.angles of size 35 mm x 35 mm x 3 mm duly painted including two m.s.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.spec. number as directed by engineer in charge morth 801 item no. 16 :- providing and making upvc/mdpe pipe consumer service connection on distribution main by drilling hole with suitable means , including all labour , upvc/mdpe pipe of required length with or without road crossing as described below, including cost of specials like saddle/clamp saddle of suitable material, and diameter suitable for distribution main, 15mm /20mm/ 25mm respective dia heavy duty brass/polyprophylyne(twin jacketed ) ferrule , male and female thread adapter elbow, bends,couplers ,tees, clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, gi casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by engineer in "trial run item no. 1 commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by mjp / local body and handing over the scheme to local body after completion of the above period as directed by engineer-in-charge.note: required chemicals to be supplied by department free of cost and electricity bill will also be paid by the department.for singlvillage" piped water supply scheme at - adnale tal- tala

State Government

TRN :35397459 | 04 Oct, 2025

Tender Value : 0

Bhatinda - Punjab

Tender for gem bids for mechanical, bid number gem2025b6681215 dated 15-09-2025 bid document1 109 1 1 hydraulic system trainer kit, pneumatic system trainer kit, pelton wheel turbine test rig, francis turbine test rig, brake master cylinder, balancing machine, hydrometer, diesel fuel supply system, abs system trainer, transparent truck clutch structure model, electric vehiclekit, digital pyrometer, metallurgical microscope, sparktest apparatus, standard prepared readymade samples orspecimen with photographs, tool kit, ampere meter, pressure gauge, compound gauge, ring spanner set, thermometer with case, swaging tool set, voltmeter, valve key, leak detector to detect cfc and hfcs, thermostatic switch etc fitted on board, model ofrefrigeration cycle, digital anemometer, gas charging kit, model of open type refrigerant compressor, water coolerof 100 litre capacity, split ac test rig, actual cut sectionmodel of screw compressor, actual cut section model ofrotary compressor, vapour absorption refrigeration testrig, vaccum pump, ice plant trainer, sling psychrometer, thermocouple, infrared thermometer, metallic cut sectionmodels of boiler mountings, model of nestler boiler, actualcut section model of four stroke single cylinder dieselengine, model of amal carburettor, digital vernier callipar, digital micrometer, height gauge, go-no go thread pluggauge, go-no go snap gauge, go-no go ring gauge, cylinder rollers and spherical balls, slip gauges set, vernier bevel protractor, surface plate, tool makermicroscope, auto collimator with stand, angle deckor withset of angle gauges, profile projector, cylindrical boregauge, screw thread micrometer, sine bar 125mm, sinebar 250 mm, feeler gauge, wire gauge, radius gauge, comparator stand, angle plate, mechanical comparator, clinometer, gear tooth vernier, metallic try square, meteric thread pitch gauge, electronic weighing machine, digital tachometer, simply supported beam apparatus, apparatus for determining centre of gravity of regular andirregular lamina, models of different wooden joints, modelsof screw threads, models nuts and bolts, models oflocking devices, models of keys and cotter joints, modelsof riveted joints, models of bearing, models of pulleys, model of drilling jig, models of different types of gears, planner, milling machine conventional, power hacksaw, welding screen, gloves, oxygen regulator with spanner, motor coil winding machine, digital clip on meter, earthleakage circuit breaker, single phase, earth leakagecircuit breaker, three phase, residual current circuitbreaker, single phase, residual current circuit breaker, three phase, heat convector, desert cooler, electric oven, voltage stabilizer, digital energy meter, analog meggar, digital earth tester, plier, cutting plier 8 inch, leg vice 4inch, round die handle, tap wrench- 5 by 16th of an inchto 1 inch, pipe vice, grinder, bench grinder 0.5 hp motor, scriber 8 inches, sheet steel wire gauge, circle cuttingmachine, edge folding machine, foot shear machine, rivet snap 0.25, 0.5, 0.75, 1 inch, rivet set 0.25, 0.5, 0.75, 1 inch, hand stake, funnel stake, round stake, taperstake, shovel, riddle, foundry bellow, silica sand, bentonite clay type, molasses, ladle, ladle holder, oilfired tilting type furnace, sand mix muller, moulding board //bid details2 / 109

Central Government/Public Sector

TRN :35376720 | 04 Oct, 2025

Tender Value : 0

Belgaum - Karnataka

Tender for gem bids for procurement, iron coil plate 5mm x 304.80mm x 609.50mm, iron coilpipe 5mm x 114.30mm x 609.50mm, iron rod 50.80mm x609.50mm, iron rsj grider 6mm x 125mm x 75mm x609.5mm thickness 5mm, 12 volt 7 ah lead acid battery, electric cable 2mm single core, duplicate cordtex, bootoblique shoes pressure, doll pressure switch, toy car pullswitch, brief case release switch, ladies purse tilt switch, foot mat pressure switch, ir barrier with infra red switch, bag with pull switch, trip wire pull, post office box irproxy, cycle ied armatur switch, curtain pull, watercamper water drain, flower pot sound activated, rc ied, pressure cooker ied, pressure switch, book with releseied, dust bin ied, letter parcel with release ied, floatation bag, rifle bag, slide pulley, puller, op pin, transportation and installation

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Related Searched Keywords : foot plate

List of foot plate Tenders

Tender for gem bids for ttieg, high pressure washer 3hp for washing for washing ofvehicle, foot mat set for tata safari, screw driver set, fire extinguisher 1 kg mg, pilot plate 12 cm x 45cm, guideplate 12cm x 45cm, veh cover one each for maruti gypsymahindra scorpio and tata safari

Tender for supply of spare parts of spring loaded foot switch for pvef, psa, pvig consisting of three items. 1 spring for foot switch 01 no. 2 rocker with shorting plate for foot switch 01 no. 3 fixed contact block for foot switch 01 no. clw specn. no.- clw/es/3/0032 alt-g.

Tender for supply of foot plate arrangement for demu coach.

Get foot plate Tender Alert...

Related Searched Keywords : foot plate

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us